Loading…
Name ID Label Description Type Access Class
HartPollingAddress 402A Poll.addr. An adress 0-15 can be selected for instruments with the HART-Protocol. If the adress 0 is entered, then the current output varies as the flowrate in the range of 4-20 mA. If additional instruments are connected to the bus and a adress 1-15 is entered, the converter operates in Multidrop-Mode. The current output is fixed at constant 4mA. The output values are then only can only be read using the HART-Communication. R/W Unsigned 2048
ucAnzeigeModus 4043 Display mode Selection 1 large and 1 small line or 4 small lines. R/W Enum 2048
ucAnzeigeKontrast 409C Contrast Setting the display contrast, STEP = darker; DATA = lighter. R/W Unsigned 2048
ucKommunikation 409E Communication Turn HART -Communication on and off. R/W Enum 2048
ucTreiber 40A0 Driver Selects the mode of the driver R/W Enum 2048
ucBestellVariante 40A2 Communication The calibrating mode 0 or 255 can be select. With mode 0 the primarys SE2_/SE4_ are calibrated together with converter. The meter size and adjusted value are primary accompanying. At mode 255 the converter can delivered to connect with old primary model, Cs = 100% and Cz = 0% be printed on the FRAM. The customer can select meter size and excitation frequency with ENTER. The EASY SETUP for a old primary must be followed for operation. R/W Unsigned 2048
ucNetzfrequenz 40A4 Line frequency Selection of the line frequency of the flowmeter primary was calibrated. Selection 50/60 Hz only available for Older Models. R/W Enum 2048
ucStartUpKommuService 40A6 Startup Commu. With a TTL-Signal the communication type HART or ASCII can be selected of the service plug for the connection. R/W Enum 2048
ucTestImpulsausgangEin 40A8 Startup Commu. Function test for the pulse output. R/W Enum 2048
ucIoutArt 40AA Current output Selection of the current output range. For HART-Protocol always 4-20 mA. R/W Enum 2048
Name ID Label Description Type Access Class