Loading…
名称 ID 标签 描述 类型 访问 分类
ucFliessrichtung 4020 Flow indication Selection of the flow direction to be metered, forward/reverse or forward only. The direction indicator R in the display blinks when flowrate is in the reverse flow direction and 0% is displayed. 读/写 枚举 2048
ucRichtungsanzeige 4021 Flow direction Normal/Inverse, reverse the flow direction forward and reverse flow display. 读/写 枚举 2048
ucAufnehmerType 4056 Type of Primary Selection the flowmeter primary type connected to the converter. 读/写 枚举 2048
ucAufnehmerTyp 4055 Frequency Primary Selects the excitation of primary 读/写 枚举 2048
HartPollingAddress 402A Poll.addr. An adress 0-15 can be selected for instruments with the HART-Protocol. If the adress 0 is entered, then the current output varies as the flowrate in the range of 4-20 mA. If additional instruments are connected to the bus and a adress 1-15 is entered, the converter operates in Multidrop-Mode. The current output is fixed at constant 4mA. The output values are then only can only be read using the HART-Communication. 读/写 无符号 2048
ucAnzeigeModus 4043 Display mode Selection 1 large and 1 small line or 4 small lines. 读/写 枚举 2048
ucAnzeigeKontrast 409C Contrast Setting the display contrast, STEP = darker; DATA = lighter. 读/写 无符号 2048
ucKommunikation 409E Communication Turn HART -Communication on and off. 读/写 枚举 2048
ucTreiber 40A0 Driver Selects the mode of the driver 读/写 枚举 2048
ucBestellVariante 40A2 Communication The calibrating mode 0 or 255 can be select. With mode 0 the primarys SE2_/SE4_ are calibrated together with converter. The meter size and adjusted value are primary accompanying. At mode 255 the converter can delivered to connect with old primary model, Cs = 100% and Cz = 0% be printed on the FRAM. The customer can select meter size and excitation frequency with ENTER. The EASY SETUP for a old primary must be followed for operation. 读/写 无符号 2048
名称 ID 标签 描述 类型 访问 分类