Loading…
Name ID Label Description Type Access Class
ucDlrEinAus 4038 Detector e.pipe On/Off selection for the operation Detector empty pipe. R/W Enum 2048
ucAlarmlRohr 4039 Alarm e.pipe When the meter tube is empty an indication is displayed and a signal is sent to the terminals when the alarm setting is on. No alarm contact when the Alarm setting is off. R/W Enum 2048
ucIoutlRohr 403A Iout at e.pipe Current output value Low or High during an empty pipe condition. R/W Enum 2048
ucSimulationEin 408D Simulation Mode Turn flowrate simulation on /off. R/W Enum 2048
ucTestModeEin 408F Test Mode Only for checking the converter with simulator 55XC4000. R/W Enum 2048
ucAnzeigeZeile1 4044 1st line Selection for the 1st display line. R/W Enum 2048
ucAnzeigeZeile2 4045 2nd line Selection for the 2nd display line. R/W Enum 2048
ucAnzeigeZeile3 4046 3rd line Selection for the 3rd display line. R/W Enum 2048
ucAnzeigeZeile4 4047 4th line Selection for the 4th display line. R/W Enum 2048
ucBetriebsart 4000 Operating mode Operating mode Normal: is selected for continuous flow metering. Operating mode Fast: accelerated flow signal processing (e.g. short batches). Operating Mode Piston Pump: for pulsating flows. In this operating mode the improved reproducibility of the flow signal measurements is archieved. The totalizer is automatically set to the Difference Totalizer mode. Any reverse flow which may occur is automatically substracted from the totalizer values. R/W Enum 2048
Name ID Label Description Type Access Class