Loading…
Loading…
| Name | ID | Label | Description | Type | Access | Class |
|---|---|---|---|---|---|---|
| deviceID | 4010 | Device ID | R | Enum | 4096 | |
| range_Units | 4034 | PV Range Units | ﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙ単位 - 単位はﾃﾞｼﾞﾀﾙ値, 最小ｽﾊﾟﾝ, Upper ﾚﾝｼﾞ値, Lower ﾚﾝｼﾞ値, Lower ｾﾝｻｰ ﾘﾐｯﾄ, Upper ｾﾝｻｰ ﾘﾐｯﾄの表示に使用されます。 | R/W | Enum | 8 |
| pv_Value | 4080 | Primary Value | R | Float | 10 | |
| pv_Units | 4025 | PV Units | Device primary variable (PV) display units | R/W | Enum | 8 |
| sensorLimit_Units | 409D | Snsr lim Units | ﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙ単位 - 単位はﾃﾞｼﾞﾀﾙ値, 最小ｽﾊﾟﾝ, Upper ﾚﾝｼﾞ値, Lower ﾚﾝｼﾞ値, Lower ｾﾝｻｰ ﾘﾐｯﾄ, Upper ｾﾝｻｰ ﾘﾐｯﾄの表示に使用されます。 | R/W | Enum | 8 |
| pv_USL | 409E | PV USL | USL 値 (ｱｯﾊﾟｰ ｾﾝｻｰ ﾘﾐｯﾄ値) - Upper ﾚﾝｼﾞ値で使用できる最高の値を示しています。 | R | Float | 8 |
| pv_LSL | 409F | PV LSL | LSL 値 (ﾛｳｱｰ ｾﾝｻｰ ﾘﾐｯﾄ値) - Lower ﾚﾝｼﾞ値で使用できる最小の値を示しています。 | R | Float | 8 |
| pv_Min_Span | 40A0 | Minimum Span | 最小ｽﾊﾟﾝ - Lower ﾚﾝｼﾞ値から Upper ﾚﾝｼﾞ値までの使用できる最小幅を示しています。 | R | Float | 8 |
| pv_Damp | 4035 | Damping | ﾀﾞﾝﾋﾟﾝｸﾞ - ﾀﾞﾝﾋﾟﾝｸﾞ ﾀｲﾑはﾃﾞｼﾞﾀﾙ表示とｱﾅﾛｸﾞ出力に関係するｱﾅﾛｸﾞ ﾊﾞﾘｭｰの両方に作用します。単位は常に秒で表します。 | R/W | Float | 8 |
| pv_SSN | 4014 | ｾﾝｻｰ S/N | ｾﾝｻｰ ｼﾘｱﾙ ﾅﾝﾊﾞｰ - ﾃﾞｼﾞﾀﾙ値表示又はﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙを主に導出するｾﾝｻｰを一意に識別します。 | R/W | Unsigned | 2048 |
| analog_value | 40A1 | Current Out | AO (ｱﾅﾛｸﾞ出力値) - ﾉｰﾏﾙ ｵﾍﾟﾚｰﾃｨﾝｸﾞ ﾓｰﾄﾞでのﾃﾞｼﾞﾀﾙ値で表示します。 | R/W | Float | 66 |
| alarmSelection | 4036 | Alarm Current | AO ｱﾗｰﾑ ﾀｲﾌﾟ (ｱﾅﾛｸﾞ出力ｱﾗｰﾑ ﾀｲﾌﾟ) - ｱﾅﾛｸﾞ出力がﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙに追従できないときにｱﾅﾛｸﾞ出力をどうするか定義します。Note - ﾃﾞｼﾞﾀﾙ値表示には影響しません。 | R/W | Enum | 64 |
| percent_range | 40A2 | Primary % Range | % ﾚﾝｼﾞ - ﾉｰﾏﾙ ｵﾍﾟﾚｰﾃｨﾝｸﾞ ﾓｰﾄﾞでの Lower/Upper ﾚﾝｼﾞ値によるﾃﾞｼﾞﾀﾙ値表示です。単位は常にﾊﾟｰｾﾝﾄです。 | R | Float | 34 |
| sv_Value | 4081 | Temperature (SV) | Secondary variable temperature | R | Float | 10 |
| sv_Units | 4028 | Temp.unit | Temperature engineering units for all temperature values in the device. | R/W | Enum | 8 |
| tv_Value | 4082 | Uncomp. Conductivity (TV) | Teritary value Uncompensate4d. Conductivity | R | Float | 10 |
| tv_Units | 40A3 | Uncomp. Conductivity(TV) unit | Teritiary variable Uncomp. Conductivity engineering units | R | Enum | 8 |
| qv_Value | 4083 | Comp. Conductivity (QV) | Quaternary variable Comp. Conductivity | R | Float | 10 |
| qv_Units | 40A4 | Comp. Conductivity (QV) unit | Quaternary variable Comp. Conductivity engineering units | R | Enum | 8 |
| hwRevisionText | 4011 | Hardware revision | Field device HW revision | R | ASCII | 2048 |
| swRevisionText | 4012 | Software revision | Field device Firmware revision | R | ASCII | 2048 |
| deviceSerialNumberText | 40CF | Device Serial Number | Unique device serial No. | R | ASCII | 2048 |
| var_analyzerType | 4015 | Analyzer type | PV measurement will be Conductivity or Concentration based on selection from Analyzer Type When PV is Concentration, Conductivity value is available as QV (Comp. Conductivity) | R/W | Enum | 8 |
| var_cellConstant | 4026 | Cell Constant | Sensor cell constant | R/W | Float | 8 |
| var_sensorDiag | 4027 | Sensor diag. | Sensor Diagnostics selection determines whether certain sensor diagnostics are enabled or disabled | R/W | Enum | 8 |
| var_concName | 4023 | Conc. Curve Name | This is a six character text name for the concentration curve. It could be modified in user-defined concentration configuration. | R/W | ASCII | 8 |
| var_concUnit | 4022 | Conc. Unit | Concentration unit is % for pre-defined solute algorithms. unit can be selected between percent, ppm, µg/l, ppb, mg/l and none for user-defined solute algorithm. | R/W | Enum | 8 |
| var_hwWriteProtection | 403B | HW write protection | Hardware write protection | R | Enum | 2 |
| var_swWriteProtection | 403C | SW write protection | Software write protection | R/W | Enum | 8 |
| var_tempSensorType | 4030 | Temp. sensor type | Temperature sensor type recognized | R | Enum | 2 |
| var_tempARStatus | 4032 | TC Recognition Status | Temp sensor recognition status. Device scans for TC at power up, when TC type is switched from MANUAL to AUTOMATIC, and when TC recognition is run through the appropriate menu. | R | Enum | 2 |
| var_pureH2Ooption | 402E | Pure H2O option | When Temp comp option is set to Pure H2O, temp comp is based on Pure H2O option selection of either a neutral salt, acid or base. | R/W | Enum | 0 |
| var_tempAutoTCOption | 402B | Auto TC Option | Determines the algorithm that adjusts for the temperature effect of a solute. | R/W | Enum | 8 |
| var_tempAutoTCCoeff | 402D | TC Coeff | Temp comp is based on percent change of conductivity from an adjustable reference temperature per deg C. The value is adjustable between 0 and 9.99 % per deg-C | R/W | Float | 8 |
| var_tempCompType | 4029 | Temp.Comp.Type | Determines the type of Temperature Compensation algorithm applied to the Primary Value | R/W | Enum | 8 |
| var_manualTemp | 402A | Manual Temp | Manual Temperature Compensation Value - is used in Nernstian temp. comp. when the Temp Comp selection is Manual | R/W | Float | 8 |
| var_refTemp | 402F | Reference Temp | Variable reference temperature - this provides the ability to use any temp as the reference temp used to determine the temp-compensated PV | R/W | Float | 8 |
| var_TCUsrDefX1 | 40A9 | Temp 1 | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_TCUsrDefX2 | 40AA | Temp 2 | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_TCUsrDefX3 | 40AB | Temp 3 | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_TCUsrDefX4 | 40AC | Temp 4 | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_TCUsrDefX5 | 40AD | Temp 5 | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_TCUsrDefX6 | 40AE | Temp 6 | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_TCUsrDefY1 | 40C5 | K1/Kref | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_TCUsrDefY2 | 40C6 | K2/Kref | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_TCUsrDefY3 | 40C7 | K3/Kref | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_TCUsrDefY4 | 40C8 | K4/Kref | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_TCUsrDefY5 | 40C9 | K5/Kref | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_TCUsrDefY6 | 40CA | K6/Kref | When the user defined Auto temperature compensation is selected, the values in this curve are used for temperature compensation.The curve points Temp 1 to Temp 6 are the temperature values and the curve points K1/K25 to K6/K25 are the corresponding ratiosof uncompensated conductivity at Temp x to the conductivity at the reference temperature. | R/W | Float | 8 |
| var_ConcUsrDefX1 | 40BB | X1 Cond | Concentration curve with x-axis = Conductivity in µS/cm and y-axis = Concentration in Conc. Unit. | R/W | Float | 8 |
| Name | ID | Label | Description | Type | Access | Class |