Loading…
Name ID Label Description Type Access Class
filter 4022 Filter Select Filter on, if the output signal is noisy or for pulsating flows (pulsation free output). R/W Enum 2048
prog_unit 4035 Prog unit select with density if the programable unit is massflowand without density if it is volumeflow. R/W Enum 2048
function_p1p2 4029 Function P1/P2 on operating mode 2 RANGE,AUTOMATIC terminal P1/P2 signals the flow range. On the other operating modes all other functions are available. R/W Enum 2048
function_x1 4023 Function X1 on operating mode 2 RANGE,EXTERN terminal X1 selets the flow range. If the contact is open range 1 is selected, if it is closed range 2 is selected. On the other operating modes the other functions are available. R/W Enum 2048
Iout_at_alarm 402D Iout at Alarm Select HIGH or LOW current output for error conditions. R/W Enum 2048
detector_e_pipe 4011 Detector e.pipe select ON if the detector e.pipe shall signals an empty pipe. R/W Enum 2048
alarm_e_pipe 4012 Alarm empty pipe If set to ON an empty pipe is signaled with the combined output signal. If set to off no contact output signal will be set. R/W Enum 2048
Iout_at_e_pipe 4013 Iout at empty pipe Select HIGH or LOW current output on empty pipe. R/W Enum 2048
totalizer_function 4016 Totalizer funct. If STANDARD is selected the count pulses for forward and reverse flow directions are integrated separately in two different counters. On DIFFER.TOTAL only a single difference totalizer is utilized for both flow directions. On forward flow the totalizer is incremented, on reverse flow he is decremented. R/W Enum 2048
display_1st_line 402F 1st line The process display for the 1st line of the secondary. R/W Enum 2048
Name ID Label Description Type Access Class