Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
k4 | 4065 | k4 | k-factor k4 for k-factor linearisation. Please refer to calibration protocol! | R/W | Float | 2048 |
k5 | 4067 | k5 | k-factor k5 for k-factor linearisation. Please refer to calibration protocol! | R/W | Float | 2048 |
float_variable_code | 40F0 | Index into Dynamic Variables Array- An index that identifies a Field Device Variable that is dynamic with respect to time, with no user input | R/W | Index | 4096 | |
units_code | 07E9 | R/W | Enum | 4096 | ||
response_code | 0096 | Command Specific Response Code- Data that is returned in the Field Device response, that indicates the relative success of the Command sent in the Host request. This information may relate to the Data of the Host request or to the command itself. | R/W | Enum | 4096 | |
comm_status | 0098 | Communications Error Summary- The Field Device has detected the following error condition while attempting to receive the Host request. Therefore the Command was not accepted, and the Host request caused no change to occur in the Field Device. | R/W | BitEnum | 131 | |
device_status | 0097 | Field Device Status- Data indicating that the Field Device has detected condition(s) in the Field Device relating to: its hardware / the validity of a variable / its operating status / an internal process | R/W | BitEnum | 131 | |
manufacturer_id | 0099 | Fabricante | Código de identificación del fabricante: Hace referencia a un fabricante específico y suele ser el nombre de la empresa responsable de la fabricación de este dispositivo de campo. | R | Enum | 128 |
device_type | 009A | Model | Model- References the type of Field Device, usually an advertised model number, that is unique to a single manufacturer | R | Enum | 128 |
request_preambles | 009B | Num req preams | Number of Request Preambles- Number of Preambles required from the Host request by the Field Device | R | Unsigned | 128 |
universal_revision | 009C | Universal rev | Universal Revision- Revision of the Universal Device Description, that the Field Device conforms to | R | Unsigned | 128 |
transmitter_revision | 009D | Fld dev rev | Field Device Revision- Revision of the Field Device Specific Device Description, that the Field Device conforms to | R | Unsigned | 128 |
software_revision | 009E | Software rev | Field Device Software Revision- This revision corresponds to the software or firmware, that is embedded in the Field Device | R | Unsigned | 2048 |
hardware_revision | 009F | Hardware rev | Revisión del hardware: Revisión que corresponde al hardware electrónico del dispositivo de campo. | R | Unsigned | 2048 |
physical_signaling_code | 00AB | Physicl signl code | Physical Signaling Code- The Physical Signaling Code describes the type of Physical Layer that has been implemented in the hardware that is responsible for the HART Communication port | R | Enum | 2048 |
device_flags | 00A0 | Dev flags | Field Device Flags- Describes special features of the Field Device that affect the Data Link Layer | R | BitEnum | 128 |
device_id | 00A1 | Dev id | Field Device Identification- Uniquely identifies the Field Device when combined with the Manufacturer Identification and Device Type. Therefore, this variable cannot be modified by the Host user. | R | Unsigned | 128 |
polling_address | 00A2 | Poll addr | Polling Address- Address used by the Host to identify a Field Device, and changeable by the User to control: the Multidrop Mode for Analog Output 1), and the Analog Output Fixed Mode of Analog Output 1) | W | Unsigned | 128 |
tag | 00A3 | Etiqueta | Etiqueta: Texto asociado a la instalación del dispositivo de campo. El usuario puede usar este texto de cualquier manera. Un uso recomendado es como etiqueta única para una planta que se correlaciona con la etiqueta de dispositivo de campo: esquema de planta, o en un sistema de control. Esta variable también se usa como tipo de dirección de la capa de enlace de datos. | R/W | PackedAscii | 2048 |
message | 00A4 | Mensaje | Mensaje: Texto asociado al dispositivo de campo. El usuario puede usar este texto de cualquier manera. No hay ningún uso recomendado. | R/W | PackedAscii | 2048 |
descriptor | 00A5 | Descriptor | Descriptor- Text that is associated with the Field Device. This text can be used by the user in any way. There is no specific recommended use. | R/W | PackedAscii | 2048 |
date | 00A6 | Fecha | Fecha: Fecha del calendario gregoriano almacenada en el dispositivo de campo. El usuario puede usar esta fecha de cualquier manera. No hay ningún uso específico recomendado. | R/W | HartDate | 2048 |
write_protect | 00A7 | Write protect | Write Protect Mode- Indicates whether variables can be written to the Field Device, or whether commands that cause actions, to be performed in the Field Device, can or cannot occur. Depending on the Field Device, this is a mode that is controllable by the user, either via the Field Device hardware or the HART Protocol. | R | Enum | 2048 |
private_label_distributor | 00A8 | Distribuidor | Private Label Distributor- References the company that is responsible for the distribution of this Field Device to customers | R | Enum | 2048 |
final_assembly_number | 00A9 | Final asmbly num | Número de ensamblaje final: Número que se utiliza con fines de identificación y está asociado al dispositivo de campo en general. | R/W | Unsigned | 2048 |
transmitter_variable_code_1 | 0FA0 | Index into Dynamic Variables Array- Is the first an array of addresses, whose value is identified by the Field Device Variable Code | R/W | Index | 4096 | |
transmitter_variable_code_2 | 0FA2 | Index into Dynamic Variables Array- Is the second of an array of addresses, whose value identified by the Field Device Variable Code | R/W | Index | 4096 | |
transmitter_variable_code_3 | 0FA3 | Index into Dynamic Variables Array- Is the third of an array of addresses, whose value identified by the Field Device Variable Code | R/W | Index | 4096 | |
transmitter_variable_code_4 | 0FA4 | Index into Dynamic Variables Array- Is the fourth of an array of addresses, whose value identified by the Field Device Variable Code | R/W | Index | 4096 | |
primary_variable_code | 0FD0 | PV is | Primary Index into Dynamic Variables Array- An index location, that indicates which Field Device dynamic variable has been mapped into the Primary Variable dynamic variable | R/W | Index | 128 |
secondary_variable_code | 0FD1 | SV is | Secondary Index into Dynamic Variables Array- An index location, that indicates which Field Device dynamic variable has been mapped into the Secondary Variable dynamic variable | R/W | Index | 128 |
tertiary_variable_code | 0FD2 | TV is | Tertiary Index into Dynamic Variables Array- An index location, that indicates which Field Device dynamic variable has been mapped into the Tertiary Variable dynamic variable | R/W | Index | 128 |
fourth_variable_code | 0FD3 | 4V is | Fourth Index into Dynamic Variables Array- An index location, that indicates which Field Device dynamic variable has been mapped into the Fourth Variable dynamic variable | R/W | Index | 128 |
burst_command_number | 0FFD | Burst option | Opción de ráfaga: Selecciona las variables a las que se aplicarán ráfagas si el modo de ráfaga está activado. | W | Enum | 128 |
burst_mode_select | 0FFF | Burst mode | Burst Mode Select- Selects the mode for the Burst Mode functionality. If Burst is enabled the Field Device will generate HART messages on the Link without individual requests from the Host. | W | Enum | 128 |
eeprom_select | 0FAB | Selección EEPROM | Selección de memoria de solo lectura borrable eléctricamente: Controla los datos de: Memoria EEPROM de solo lectura/Memoria de solo lectura. | R/W | Enum | 4096 |
flow_alarm_select | 1F83 | AO Alrm typ | Analog Output Alarm Type- Defines how the Analog Output will respond when the Field Device detects that the Analog Output may not be tracking the associated Field Device Variable. NOTE- The Digital Value representation may not be determinate. | R | Enum | 64 |
flow_analog_value | 1F7D | AO1 | Valor de salida analógica: Valor que sigue la representación del valor digital, bajo modos de funcionamiento normales | R/W | Float | 66 |
flow_damping_value | 1F87 | PV Damp | Valor de amortiguación: Constante de tiempo de amortiguación que se aplica a la representación del valor digital y al valor analógico de la respectiva salida analógica. Las unidades de esta variable siempre se indican en segundos. | R/W | Float | 32 |
flow_lower_range_value | 1F86 | PV LRV | Valor de rango inferior: Define el punto final de funcionamiento del que se derivan el valor analógico, y el punto 0% del rango de porcentaje. Además, el valor de rango inferior define un punto final de funcionamiento del que se derivan las alarmas asociadas al valor analógico y las alarmas asociadas a la representación del valor digital. | R/W | Float | 32 |
flow_lower_sensor_limit | 1F80 | PV LSL | Valor límite inferior del sensor: Define el valor mínimo utilizable para el valor de rango inferior. | R/W | Float | 8 |
flow_minimum_span | 1F81 | PV Min span | Valor de span mínimo: Define la menor diferencia permitida entre el valor de rango superior y el valor de rango inferior. | R/W | Float | 32 |
flow_percent_range | 1F7E | PV % rnge | Porcentaje de rango: Variable que rastrea la representación del valor digital con respecto al rango definido por el valor de rango inferior y el valor de rango superior, para modos de funcionamiento normales. Las unidades de esta variable siempre son en porcentaje. | R/W | Float | 34 |
flow_sensor_serial_number | 1F82 | PV Snsr s/n | Número de serie del sensor: Identifica de manera única el sensor del que se deriva principalmente la representación del valor digital o la variable del dispositivo de campo. | R/W | Unsigned | 2048 |
flow_upper_range_value | 1F85 | PV URV | Valor de rango superior: Define el punto final de funcionamiento del cual se derivan el valor analógico y el punto 100% del rango de porcentaje. Además, el valor de rango superior define un punto final de funcionamiento del que se derivan las alarmas asociadas con el valor analógico y las alarmas asociadas con la representación del valor digital. | R/W | Float | 32 |
flow_upper_sensor_limit | 1F7F | PV USL | Valor límite superior del sensor: Define el valor máximo utilizable para el valor de rango superior. | R/W | Float | 8 |
transfer_function | 1F84 | Xfer fnctn | Función de transferencia: Define la función de transformación que se aplicará desde la variable de dispositivo de campo a la salida analógica y el rango de porcentaje. La función de transferencia no afecta a la representación del valor digital. | R | Enum | 64 |
Name | ID | Label | Description | Type | Access | Class |