Variable Name: flowCalc

Variable ID: 0x4017

Variable Label: Flowrate calculate pulses

Variable Help: The flowrate is calculated by measuring the time between a number of pulses, for example 10 pulses. The more pulses the more accurate the flowrate will be. The maximum value is 255 pulses. Note: the lower the number of pulses, the higher the power consumption of the unit will be (important for battery powered applications). Note: for low frequency applications (below 10Hz): do not program more than 10 pulses else the update time will be very slow. Note: for high frequency application (above 1kHz) do program a value of 100 or more pulses.

Variable Handling: R/W

Variable Class:

Variable Size: 1

Variable DataType: Unsigned

Variable Display Format: |en|3d

Variable Edit Format:

Variable Unit:

Variable Max: N/A

Variable Min: N/A

Variable Read Command List

Command Number	Command ID	Command Name
130	4019	readFlowratePulseConfig

Variable Write Command List

Command Number	Command ID	Command Name
131	401B	writeFlowratePulseConfig