Loading…
Loading…
Variable Name: klartext
Variable ID: 0x4208
Variable Label: texte
Variable Help: no Help
Variable Handling: R
Variable Class: Local
Variable Size: 1
Variable DataType: Enum
Variable Enum Value | Variable Enum Text |
---|---|
0x0001 | Checksum Err: instrument Init |
0x0002 | Instrument Failure |
0x0033 | Datalogger full! |
0x0034 | Datalogger 90% reached ! |
0x0035 | Date and Time not valid! |
0x003A | dongle failure |
0x003B | Pump deteriorated! |
0x003D | Interface card data invalid |
0x003F | Pump defect! |
0x0040 | Gas- flow too low |
0x0041 | 3rd wire is disconnected |
0x0043 | Relais module defect! |
0x0044 | Alarms deactivated ! |
0x0064 | No Sensor or bad contact |
0x0065 | Sensordata fault: Remove and plug Sensor |
0x0066 | Sensor not supported |
0x0067 | Sensordata-fault Channel-init required! |
0x0069 | Sensor-Check necessary! |
0x006A | No valid Zero calibration! |
0x006B | No valid Span calibration! |
0x006C | Sensor defect! |
0x006D | Channel Error |
0x006F | Increased measuring failure |
0x0070 | Sensor near end of life! |
0x0072 | Calibration interval expired |
0x0073 | Measure value out of range incr. meas. failure! |
0x0077 | Sensor warming up ! |
0x0078 | Increased measuring failure |
0x0079 | Invalid fresh air calibration! |
0x007A | Invalid mixed gas calibration! |
0x007D | Incorrect Sensortest! |
0x0081 | Sensortest failure! Refill sensor |
0x0082 | Sensor-Partno. not configured |
0x0083 | Sensortest will fail soon! |
0x0084 | Sensortest failure! Refill sensor |
0x0086 | Sensor Connection Error |
0x0087 | Sensor card info not available |
0x0088 | Sensor defect! |
Variable Display Format:
Variable Edit Format:
Variable Unit:
Variable Max: N/A
Variable Min: N/A
Variable Read Command List
None
Variable Write Command List
None