变量名称： diagnosisConditionDetailsCodes38_0

变量ID： 0x4361

变量标签： Ext. Diagnostics 1

变量描述：

变量处理： 读

变量分类： 动态 | 诊断

变量长度： 1

变量数据类型： 枚举

变量枚举值	变量枚举文本
0x0000	Data in simulation mode
0x0001	Alarm in simulation mode
0x0002	Transmitter Non-Volatile failure
0x0003	Sensor Non-Volatile memory write failure
0x0004	Transmitter Non-Volatile memory write failure
0x0005	Replace Sensor to Electronics blocked
0x0006	Replace required Sensor to Electronics blocked
0x0007	Replace required both directions enabled
0x0008	Sensor Non-Volatile failure
0x0009	Electronics temperature low
0x000A	Electronics temperature high
0x000B	Invalid input value
0x000C	Power supply failsafe
0x000D	Span limit high
0x000E	Span limit low
0x000F	Hardware limit low
0x0010	Hardware limit high
0x0011	System limit low
0x0012	Current output in fixed mode
0x0013	Power supply too low (<10.5 VDC)
0x0014	Power supply too high (>40.5 VDC)
0x0015	Transmitter RAM failure
0x0016	Transmitter ROM failure
0x0017	Ambient temperature too high
0x0018	Ambient temperature too low
0x0019	Sensor communications error
0x001A	Sensor RAM failure
0x001B	Sensor ROM failure
0x001C	Sensor signal data failure
0x001D	PV value out of range
0x001E	Temperature value reached limit high
0x001F	Temperature value reached limit low
0x0020	Distance value reached limit high
0x0021	Distance value reached limit low
0x0022	Level value reached limit high
0x0023	Level value reached limit low
0x0024	Volume value reached limit high
0x0025	Volume value reached limit low
0x0026	Flow value reached limit high
0x0027	Flow value reached limit low
0x0028	Totalizer count value reached maximum value
0x0029	Sensor power limit low
0x002A	Sensor in simulation
0x00FF	OFF

变量显示格式：

变量编辑格式：

变量单位：

变量最大值： N/A

变量最小值： N/A

变量读取命令列表

命令号	命令ID	命令名称
199	4373	read_diagnosis_condition_details

变量写入命令列表

无